Fluke Norma 4000, 5000

“ 전력전자 시스템 개발과 테스트를 위한 고정밀 측정장비 ”

Feature

                      ※ 응용분야 • 전기모터와 인버터드라이브: 세밀한 스펙트럼 분석과 동적인 토크 계산능력으로 인버터에 의한 손실과 고주파에서 토크 과도현상과 고조파를 정확하게 측정할 수 있습니다. • 인버터 구동시스템: 한 개의 창에서 모든 전기, 기계적 전력요소를 동시에 측정하여 한 요소가 다른, 또는 전체 시스템에 미치는 영향을 쉽게 파악할 수 있습니다. • 조명시스템: 10MHz의 광대역과 1MHz의 샘플링속도로 안정기 출력에서의 세밀한 신호분석이 가능합니다. 독특한 션트기술로 고주파에서의 전력측정이 가능하며, 입출력 동시측정으로 안정기 손실률을 바로 확인할 수 있습니다. • 변압기: 6상을 동시에 측정하여, 매우 낮은 PF를 가지고 있는 큰변압기의 효율과 손실도 정확하게 계산합니다. 또 변압기 코일의여러 상에서의 저항 값도 동시에 확인이 가능합니다. • 자동차: 전기적 입력과 기계적 출력을 동시에 측정하여, 각 요소요소 뿐만 아니라 전체 구동시스템의 효율 및 손실을 한 눈에 확인할 수 있습니다.                                         ※ 제품별 특징 • Fluke Norma 4000: 현장용 테스트 장비로 1~3개의 입출력을 볼수 있으며, 5.7inch 디스플레이창, 고조파분석, 스코프모드, 벡터 다이어그램, 레코드기능, NormaView 소프트웨어, 확장이 가능한4MB 메모리 • Fluke Norma 5000: 출시된 전력분석계 중 가장 높은 주파수대역을 가지고 있기 때문에, 주파수변환기나 조명장비의 개발에 가장이상적인 테스트, 분석 장비입니다. 3~6개의 phase를 가지며, 옵션으로 내부프린터가 가능하며 Norma 4000의 특징을 모두 포함합니다.                             ※ Norma 시리즈 특징   • 모든 상을 동시에 측정하여 특정시간에서의 이벤트를 정확하게파악할 수 있습니다. • 모든 입력단자가 서로 완벽하게 절연되어 있습니다. • 40^th 의 전압, 전류, 전력의 고조파 분석이 가능합니다. • FFT 분석, 벡터 다이어그램, 디지털 오실로스코프 기능이 탑재되어 있습니다. • 15ms에서 3600s 까지 다양하게 평균시간을 설정할 수 있습니다. • 4MB의 메모리가 장착되며, 128MB까지 확장이 가능합니다. • 인터페이스 – RS232,와 USB가 기본 장착되며, 옵션으로 IEEE488, Ethernet, USB2.0을 선택할 수 있습니다. • 외부센서로 토크나 스피드를 측정하려면 Pl1 인터페이스를 선택하십시오. • 세밀한 분석을 위한 341kHz와 1MHz의 샘플링속도 • DC에서 3MHz, 10MHz의 주파수대역 • 데이터 다운로드, 분석, 보고서작성을 위한 NormaView 소프트웨어 ※ 제품구성

모델명	구성품
Norma 4000/5000	전원케이블5.7inch 디스플레이RS232/USB 인터페이스Fluke NormaView 소프트웨어사용자메뉴얼Test CertificateCalibration values

                     

모델명	설명
Fluke-N4K 1PP42	Fluke-Norma 4000, single phase with PP42 power phase input module
Fluke-N4K 3PP42	Fluke-Norma 4000, three phase with 3xPP42 power phase input modules
Fluke-N4K 3PP42I	Fluke-Norma 4000, three phase with 3xPP42 power phase input modules with IEEE488 / Ethernet interface
Fluke-N4K 3PP42IP	Fluke-Norma 4000, three phase with 3xPP42 power phase input modules with IEEE488 / Ethernet interface and analog / digital output channels
Fluke-N4K 3PP42B	Fluke-Norma 4000, three phase with 3xPP42 power phase input modules with current binding post
Fluke-N4K 3PP42IB	Fluke-Norma 4000, three phase with 3xPP42 power phase input modules with current binding post with IEEE488 / Ethernet interface
Fluke-N4K 3PP42IPB	Fluke-Norma 4000, three phase with 3xPP42 power phase input modules with current binding post with IEEE488 / Ethernet interface andanalog / digital output channels
Fluke-N4K 3PP50	Fluke-Norma 4000, three phase with 3xPP50 power phase input modules
Fluke-N4K 3PP50I	Fluke-Norma 4000, three phase with 3xPP50 power phase input modules with IEEE488 / Ethernet interface
Fluke-N4K 3PP50IP	Fluke-Norma 4000, three phase with 3xPP50 power phase input modules with IEEE488 / Ethernet interface and analog / digital output channels
Fluke-N4K 3PP52IB	Fluke-Norma 4000, three phase with 3xPP52 power phase input modules with current binding post with IEEE488 / Ethernet interface
Fluke-N4K 3PP54I	Fluke-Norma 4000, three phase with 3xPP54 power phase input modules with IEEE488 / Ethernet interface
Fluke-N4K 3PP54IP	Fluke-Norma 4000, three phase with 3xPP54 power phase input modules with IEEE488 / Ethernet interface and analog / digital output channels
Fluke-N5K 3PP50	Fluke-Norma 5000, three phase with 3xPP50 power phase input modules
Fluke-N5K 3PP50I	Fluke-Norma 5000, three phase with 3xPP50 power phase input modules with IEEE488 / Ethernet interface
Fluke-N5K 3PP50IP	Fluke-Norma 5000, three phase with 3xPP50 power phase input modules with IEEE488 / Ethernet interface and analog / digital output channels
Fluke-N5K 3PP54	Fluke-Norma 5000, three phase with 3xPP54 power phase input modules
Fluke-N5K 3PP54I	Fluke-Norma 5000, three phase with 3xPP54 power phase input modules with IEEE488 / Ethernet interface
Fluke-N5K 3PP54R	Fluke-Norma 5000, three phase with 3xPP54 power phase input modules and printer
Fluke-N5K 3PP54IP	Fluke-Norma 5000, three phase with 3xPP54 power phase input modules with IEEE488 / Ethernet interface and analog / digital output channels
Fluke-N5K 3PP54IR	Fluke-Norma 5000, three phase with 3xPP54 power phase input modules with IEEE488 / Ethernet interface and printer
Fluke-N5K 3PP64	Fluke-Norma 5000, three phase with 3xPP64 power phase input modules
Fluke-N5K 3PP64I	Fluke-Norma 5000, three phase with 3xPP64 power phase input modules with IEEE488 / Ethernet interface
Fluke-N5K 3PP64IP	Fluke-Norma 5000, three phase with 3xPP64 power phase input modules with IEEE488 / Ethernet interface and analog / digital output channels
Fluke-N5K 3PP64R	Fluke-Norma 5000, three phase with 3xPP64 power phase input modules and printer
Fluke-N5K 3PP64IR	Fluke-Norma 5000, three phase with 3xPP64 power phase input modules with IEEE488 / Ethernet interface and printer
Fluke-N5K 3PP64IPR	Fluke-Norma 5000, three phase with 3xPP64 power phase input modules with IEEE488 / Ethernet interface and analog / digital output channels and printer
Fluke-N5K 4PP54	Fluke-Norma 5000, three phase with 4xPP54 power phase input modules
Fluke-N5K 4PP54IP	Fluke-Norma 5000, three phase with 4xPP54 power phase input modules with IEEE488 / Ethernet interface and analog / digital output channels
Fluke-N5K 6PP42IB	Fluke-Norma 5000, three phase with 6xPP42 power phase input modules with current binding post with IEEE488 / Ethernet interface
Fluke-N5K 6PP42IBR	Fluke-Norma 5000, three phase with 6xPP42 power phase input modules with current binding post with IEEE488 / Ethernet interface andprinter
Fluke-N5K 6PP50IP	Fluke-Norma 5000, three phase with 6xPP50 power phase input modules with IEEE488 / Ethernet interface and analog / digital output channels
Fluke-N5K 6PP50IR	Fluke-Norma 5000, three phase with 6xPP50 power phase input modules with IEEE488 / Ethernet interface and printer
Fluke-N5K 6PP50IPR	Fluke-Norma 5000, three phase with 6xPP50 power phase input modules with IEEE488 / Ethernet interface and analog / digital output channels and printer
Fluke-N5K 6PP50I	Fluke-Norma 5000, three phase with 6xPP50 power phase input modules with IEEE488 / Ethernet interface
Fluke-N5K 6PP54I	Fluke-Norma 5000, three phase with 6xPP54 power phase input modules with IEEE488 / Ethernet interface
Fluke-N5K 6PP54IP	Fluke-Norma 5000, three phase with 6xPP54 power phase input modules with IEEE488 / Ethernet interface and analog / digital output channels
Fluke-N5K 6PP54IR	Fluke-Norma 5000, three phase with 6xPP54 power phase input modules with IEEE488 / Ethernet interface and printer
Fluke-N5K 6PP54IPR	Fluke-Norma 5000, three phase with 6xPP54 power phase input modules with IEEE488 / Ethernet interface and analog / digital output channels and printer
Fluke-N5K 6PP64I	Fluke-Norma 5000, three phase with 6xPP64 power phase input modules with IEEE488 / Ethernet interface
Fluke-N5K 6PP64IP	Fluke-Norma 5000, three phase with 6xPP64 power phase input modules with IEEE488 / Ethernet interface and analog / digital output channels
Fluke-N5K 6PP64IR	Fluke-Norma 5000, three phase with 6xPP64 power phase input modules with IEEE488 / Ethernet interface and printer
Fluke-N5K 6PP64IPR	Fluke-Norma 5000, three phase with 6xPP64 power phase input modules with IEEE488 / Ethernet interface and analog / digital output channels and printer

※ 악세서리

Rack Mounts & Hardware
Fluke-N4K Rack Kit
Fluke-N5K Rack Kit

Batteries, Chargers & Adapters
WYE Adaptor	Fluke Norma WYE Adaptor (external accessory box

Options
32 A Planar Shunt	32 A Planar Shunt
Cables for 32 A Planar Shunt	Cables for 32 A Planar Shunt
10 A Traxial Shunt	Traxial Shunt
30 A Traxial Shunt	Traxial Shunt
100 A Shunt	100 A Shunt with Cables (0.001 Ω, 0 to 0.5 MHz)
150 A Shunt	150 A Shunt with Cables (0.5 mΩ, 0 to 0.5 MHz)
300 A Shunt	300 A Shunt with Cables (0.1 mΩ, 0 to 1 MHz)
500 A Shunt	500 A Shunt with Cables (0.1 mΩ, 0 to 0.2 MHz)
LG Shunt Cables	LG Shunt Cables for High Current Shunts

Cables & Hardware
Measurement Cable Set	Measurement Cable Set (for one power phase)

Other Accessories
Norma Printer Paper

   

• SPEC
• DATA SHEET

• General Specification
  입출력수	Fluke Norma 4000: 1 to 3 Fluke Norma 5000: 3, 4 or 6
  무게	Fluke Norma 4000: Approx. 5 kg (11 lb.) Fluke Norma 5000: Approx. 7 kg (15 lb.)
  크기	Fluke Norma 4000: 150 mm x 237 mm x 315 mm (5.9 in x 9.3 in x 12.4 in) Fluke Norma 5000: 150 mm x 447 mm x 315 mm (5.9 in x 17.6 in x 12.4 in)
  내장 프린터	Fluke Norma 4000: No Fluke Norma 5000: Yes (optional)
  디스플레이	Color, 5.7“ / 144 mm – 320 x 240 pixel User-selectable background lighting and contrast.
  주파수대역	dc to 3MHz or dc to 10MHz depending on input module
  기본정확도	0.2%, 0.1% or 0.03% depending on input modules
  샘플링	0.33 MHz or 1 MHz depending on input modules
  입력전압	0.3 V to 1000 V
  입력전류(direct, not via shunt)	0.03 mA to 20 A depending on input module
  메모리(for Configurations)	4 MB
  메모리(for Settings)	0.5 MB
  Fast Fourier Transformation (FFT)	40차
  RS232/USB 인터페이스	Standard
  PI1 Process interface (8 analog/impulse inputs and 4 analog outputs)	Optional
  IEEE 488.2/GPIB interface (1 MBit/s Ethernet / 10 MBit/s or 100 MBit/s)	Optional
  Fluke NormaView PC 소프트웨어 (for data download, analysis & report writing)	Standard

   

   

  Basic Functions
  Fast Fourier Transformation (FFT)	그래픽 고조파계산동시에 3개의 Bar-graph 디스플레이. 측정값: U, I, P per phase Order: 1st to 40th harmonics, maximum half sample frequency
  Digital Oscilloscope (DSO)	Simultaneous display of up to 3 measured values on sample level. Quick view of curve form and distortion.
  Integration function (energy)	Simultaneous display of up to 6 configurable numeric values. Start/Stop conditions and positive negative direction available.
  벡터 디스플레이	Vector display of HO1 up to 6 signals. For easy testing of the right connection of the instrument and quick overview of the phase angle of each signal.
  레코더	Display of average values over time for trend determination.
  RAM data memory	Storing of sample and average values; setting of start and stop conditions. From the RAM approximately 4 MB are available for the storage of measured values.
  Configuration	Set up the analyzer to measure and display data in the format required.

   

   

  Ambient Conditions
  Working Temperature Range	5 °C to 35 °C (41 °F to 95 °F)
  Storage Temperature Range	-20 °C to 50 °C (-4 °F to 122 °F)
  하우징	Fluke Norma Power Analyzers are extremely compact and equipped with a solid metal case to meet stringent EMC requirements.
  기후조건	KYG DIN 40040, max. 85 % relative humidity, non-condensing.
  전원	85 V ac to 264 V ac, 50 Hz to 60 Hz, dc 100 to 260 V, ca. 40 VA European plug with switch. Binding post for current available on some models.
  Measuring Inputs	Safety sockets 4 mm, 2 for each input. External shunt connection over BNC socket.
  동작	Membrane keyboard with cursor – function keys and direct functions.
  Connections	Rear panel of the 3-phase Analyzer

    

  Measured Values

  Non-gapping calculation of averaged values for each phase. In three phase system additionally calculation of total power and averaging of V and I of the three phases. The fundamental H01 will be calculated in synchronous mode also for these values. Urms effective value, Urm rectified mean, Um mean value Up-, Up+, Upp peak values Ucf crest factor Ucf, Uff form factor Ufc fundamental content Uthd distortion factor DIN, IEC Irms effective value, Irm rectified mean, Im mean value Ip-, Ip+, Ipp peak values Icf crest factor Icf, Iff form factor Ifc fundamental content Ithd distortion factor DIN, IEC P active power [W] Q reactive power [Var] S apparent power [VA] ë, cos. phase angular Integral function for active power P, reactive power Q, apparent power S, voltage (Um) and current (Im), Number of digits 4 or 5 dependent on measured value.

   

  Frequency and Syncronization
  범위	DC and 0.2 Hz to sample rate
  정확도	±0.01 % of measured value (reading)
  	• Channels which can be selected: all U/I or external input. • One of three low pass filter with different frequencies can be switched into the signal. • The frequency is always visible on the top of the screen. • The BNC synchronization socket on backside of the instrument can be used either as input or output. • The input signals can be measured up to the sample rate of the power phase. The maximum level must not be higher then 50V. • The output signal is a pulsed 5Volts TTL signal (frequency depends on the measured synch frequency).

  Configuration Memory
  	Up to 15 user configurations can be saved into a permanent memory and reloaded later on. Changes that were not saved are lost after switching off the instrument.

  Interface
  	펌웨어 및 PC로의 데이터통신을 위한 RS232.프린터는 외부컨버터로 연결될 수 있습니다.
  옵션	IEEE 488.2 / 1 MBit/s Ethernet / 10 MBit/s or 100 Mbit/s

  Standards and Safety
  안전등급	EN 61010-1 / 2nd Edition 1000 V CAT II (600V CAT III) Degree of pollution 2, safety Class I EN 61558 for transformer EN 61010-2-031/032 for accessories
  최대 입력값	For voltage inputs Measurement range 1000 Veff, 2 kVpeak For current inputs Measurement range 10 Aeff, 20 Apeak
  테스트전압	Net input case (protective conductor): 1.5 KV AC Net connection Measurement input: 5.4 kV AC Measurement inputs Case: 3.3 kV AC Measurement input input: 5.4 kV
  전자기 호환성	Emission: IEC 61326-1, EN 50081-1, EN 55011 Class B Immunity: IEC 61326-1 / Annex A (industrial sector), EN 50082-1

• Fluke Norma 데이터시트(영문)

  Fluke Norma 메뉴얼(영문)